How to Root Samsung Galaxy Note 10.1 GT-N8000 on Android Jelly Bean 4.1.2 Firmware?

Tools Needed :

1.      Samsung Galaxy Note 10.1 GT-N8000

2.      ClockworkMod Touch Recovery - Download Here

3.      Super User App - Download Here

4.      Odin3_v1.85.zip - Download Here

5.      Samsung USB Drivers - Download Here

Note:

·         That rooting your device and installing ClockworkMod Recovery on your Galaxy Note 10.1 GT-N8000 will void its warranty

Advantage Over Rooting :

·         Installed the CWM Recovery on your device, you will be able to install those app that require access and write permission over the system files, and flash a custom ROM on your Galaxy Note 10.1 GT-N8000 as well.

Before  Rooting Procedure :

·         Download the ClockworkMod Touch Recovery for the Galaxy Note 10.1 GT-N8000 (do not extract).

·         Download the SuperUser App (do not extract) and copy the file to your Galaxy Tab by connecting it to computer via USB cable

·         Download ”Odin3_v1.85.zip“ and extract the zip to your desktop

·         Download and install the Samsung USB Drivers on your computer

·         Turn on USB Debugging mode on your device: Settings> Developer Options> USB Debugging> ON

·         Your Tab must be amply charged before you set out for the drill

·         Backup your essential data stored on the device

Installing the CWM Recovery on the device :

Note:

 Follow these steps to install the CWM Recovery on your Galaxy Tab

·         Open the  ”Odin3_v1.85″ folder and launch the Odin program by running the .exe file.

·         Turn Off your Galaxy Note and boot it into Download Mode. This is how you can do it: press and hold the Volume Down + Power buttons simultaneously for a few seconds till you see a warning message. Now press Volume Up key to enter the device into the Download Mode.

·         Make sure that only the “Auto Reboot”and “F. Reset Time” options are checked. Do not mess up with any other thing.

·         Now connect your Galaxy Note to the computer via a USB cable.

·         The ID:COM port at Odin will turn yellow to show that it has detected your device and you will see the “Added!!” message at the box below.

·         Click on the PDA button at Odin and select the “CWMRecoveryGTN8000Droidviews.tar” file.

·         Now click the “Start” button at Odin and let the CWM Touch Recovery be flashed onto your Tab.

·         Your device will reboot automatically when the installation finishes and then you can remove the USB cable.

 Rooting the Galaxy Note 10.1 GT-N8000:

• Turn Off your Galaxy Note and boot it into the CWM Recovery Mode: press and hold the Volume Up + Volume Down + Power buttons together for a few seconds, till you see the recovery mode with blue text on a black screen.
• In ClockworkMod recovery, scroll down to “flash zip from SD card” and press the Power button to select it.
• Press the Power button again and select “choose zip from sdcard”.
• Now using your volume keys, navigate to the “Superuser-3.1.3-arm-signed.zip” file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.
• After the installation completes, go to “+++++Go Back” and reboot the phone by selecting “reboot system now” from the recovery menu. The phone will boot now and it might take a few minutes to boot. A little patience is required therefore.

·         When the device boot up, look for an app called “SuperSU” by opening the app drawer. If it is present there, your  Galaxy Note 10.1 N8000 has been successfully been rooted.

How to Unlock Your SIM - Locked Samsung Galaxy S/S2/S3 With “GalaxSim Unlock - App” ?

Tools Needed :

1.      SIM Locked Handset (Samsung Galaxy S/S2/S3)

2.      GalaxSim Unlock App -  Download Here

Note :

·         This  will work only in Rooted Samsung Galaxy S/S2/S3.Dont Try in non rooted device.

·         Before Installing this  Backup EFS folder using KTools App From Play Store

Many people buy a SIM-locked handset and later pay for getting it unlocked. However, if you have a SIM-locked Samsung Galaxy S, Galaxy S2, or Galaxy S3, there is method that can unlock your phone and let you enjoy a SIM-free experience.

Features of the GalaxSim Unlock App:

·        Unlock/unbrand your phone.

·        Jelly Bean firmware support

·        Works on any existing rooted ROM

·        Supports international Galaxy S3 i9300 (US Qualcomm based GS3 are not supported for now)

·        Supports other Galaxy family devices (S, S2 and their variants)

·        Work if you previously unlocked your device with “voodoo unlock” or “galaxy s unlock”

·        Do not use this app if your IMEI has been lost due to any error in nv_data caused by a third party app.

·        Gives you detailed information about current locks status.

·        Backup efs before modifying anything (that should guarantee you a safe use)

·        Enables you to restore your efs backup if you want to.

·        Support for more Galaxy devices to be added soon.

How To Install Jelly Bean in Samsung Galaxy Ace S5830i Using Custom ROMs :

Tools Needed :

Ø Jelly Blast ROM Galaxy Ace S5830i

Ø Gapps-jb-20121011-signed.zip [CyanogenMod 10.0.x]

Steps :

·        Installing Custom ROMs

·        Installing Jelly Bean Using CyanogenMod 10.0.x

Before Installing Custom ROMs :

·        Get your Galaxy Ace 5830i fully charged.

·        Backup all your contacts, messages and other important data.

·        Turn on the USB Debugging mode on your device. Go to Settings> Applications>Development> USB Debugging> check the box.

·        Download the ROM  you like from the links below. Do not extract the zip file and copy it  to the main directory of your device’s SD Card (not in a sub-folder).

·        Download Google Apps for your phone from below (do not extract) and copy it to the same location as the ROM file.

Installing Custom ROMs :

·        First of all make sure that you have done all things mentioned above under preparations.

·        Turn off your device and boot it into CWM Recovery Mode. Press and hold  the Volume Up + Home keys and then long ress  the Power key till the start up screen with “Samsung Galaxy Ace GT-S5830i″ logo blinks for two times and you see a screen as shown below.  Another way to boot the device into ClockworkMod  to download the ROM Manager app from the Google Play Store and use “Reboot into Recovery” option.

·        In the Recovery Mode, use Volume, Home and Power keys to navigate between the options and select them.

·        Open “backup and restore” and backup your current ROM (important). When the backup is done go back to the main menu

·        In the CWM Recovery Mode, scroll to “wipe data factory reset” option and select “Yes”.

·        Then to “wipe cache partition” and confirm by selecting “Yes”.

·        Now go to the “advanced” option and select “wipe dalvik cache”.

·        Then come back to the main menu and select “install zip from sdcard> choose zip from sdcard”. Now browse to the ROM file and select it. Confirm your choice by selecting “yes”.

·        This will start the installation process and will take a few minutes to complete.

·        When it is done, go back and install the GApps using Step 8.

·        Return to the main menu again and select “reboot system now”. It might take a few minutes before your device reboots, so a little patience is required.

Installing Jelly Bean on Galaxy Ace S5830i :

·         Place the above file to your sd card (NOT IN ANY FOLDER!!!)

·         Switch off your phone.

·         Go to Clockwork mode

·         Use the volume keys to move up and down.

·         Wipe data and cache and Dalvik cache.

·         Now choose: Install zip from sd card.

·         Choose Gapps-jb-20121011-signed.zip [CyanogenMod 10.0.x]

·         Choose "yes"

·         It will be Installed. Now reboot your phone. First boot will take time. Be patient.

·         If you have followed EVERYTHING above carefully, you will soon boot up to your new rom.

·         Please wait until media scanning is completed.

Screen Shot :

How to Install Asphalt 7 On Samsung Galaxy S2/S3 without Rooting :

Tools Needed :

1.     Samsung Galaxy S2/S3 Handset

2.     Asphalt 7 Offline Download - Torrent Download Link

Easy Steps To Install :

·        Download Asphalt 7 Offline Torrent first

·        Install APK

·        Copy the folder: com.gameloft.android.ANMP.GloftA7HM  to  sdcard/Android /obb

·        Launch the game & connect to Wifi for the first time (if the screen becomes dark after checking for license, do not worry about that, this issue can be solved when you run the game again)

·        If you have a problem with Chinese language after running the game, just go to settings / select the 4th line downward / then select US flag.

·        Its Done

·        Its work with Samsung Galaxy S2/S3

How to Install Jelly Bean 4.1.2 in Samsung Galaxy S2 :

Tools Needed :

1.   Samsung Galaxy S2 Handset (Rooted)

2.   Jelly Bean 4.1.2 - Download Here, Mirror

3.   Odin3 v1.83.exe - Download Here

4.   Samsung kies - Download Here

Steps For Installation :

·        Put your phone into downloading mode by powering your Galaxy S2 off. Then hold down Volume Down, Home button, and the Power button together until you get an option to enter downloading mode. Hit Volume Up to enter downloading mode and connect your Galaxy S2 to your computer via USB cable.

·      Run Odin3 v1.83.exe, you should get a YELLOW box displaying COM port. If you don’t, make sure to double check that you have connected your Galaxy S2 to your computer via USB cable and installed Samsung Kies software.

·         Hit the PDA button and find the insecure file you downloaded earlier such as “Jelly Bean 4.1.2 (Actual File Name - " i9100XXLSJrooted.tar") “

·         Hit the Start button.

·         It will Take 10-20Mins,Dont Panic

·         After Installing It will get restart, Now your phone got Jelly bean 4.1.2...

Note:

Ø  It will work only in Rooted Samsung Galaxy S3

Fixed Sudden Death & Exynos Vulnerability Update Android 4.1.2 was Released by Samsung for Galaxy S3.

Tools Needed :

1. 1.  Samsung Galaxy S3 Handset
2. 2.   Odin3 v1.83.exe - Download Here
3. 3.   Samsung kies - Download Here
4. 4.   Jelly Bean 4.1.2 - Download Link Available Below

Bug Fixes and Changes :

1.         Exynos Vulnerability Abuse fixed
2.          Sudden Death Issue due to bug in Firmware fixed
3.         Two new apps added: Play Movies & TV, and Play Books

Note :

•    If you are unable to update your Galaxy S3 Over-the-Air, or if you belong to some other country or region, you can download the complete firmware from the link below and flash it manually via Odin. Please remember that I9300XXELLA firmware is only meant for Samsung Galaxy S3 model number GT-I9300. It should not be tried over any other variant of the phone.

Firmware Details:

•           PDA: I9300XXELLA
•          CSC: I9300OXAELLA
•           Version: Android 4.1.2 Jelly Bean
•          Date: December 24
•         Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
• 
  

Firmwares for Countries:

•      Saudi Arabia:  I9300XXELL5_I9300OJVELL2_KSA.zip
•      Saudi Arabia (JED): I9300XXELL5_I9300OJVELL2_JED.zip
•      Hong Kong: I9300ZSDLL1_I9300OZSDLL1_TGY.zip
•     Czech Republic: GT-I9300-XEZ-I9300XXELL4-1355126923.zip
•       Firmware Download Link Mirror: I9300XXELLA_I9300OXAELLA_BTU.zip 

How to Install :

• Extract the zip. You will see a file named “KIES_HOME_ I9300XXELLA_I9300OXAELLA_742798_REV00_user_low_ship.tar.md5″ inside the folder.
•   Download and extract Odin3_v3.04.zip.
•  Put your phone in Download Mode: Turn off the phone. Press and hold Volume Down+Home buttons and then long press the Power key for a few seconds till the screen turns. Press the Volume Up key when asked.
•   his is a no wipe firmware. Therefore, it will not delete any data from your phone.
•  Run the Odin program by double clicking the Odin3_v3.04.exe.
• Connect you phone to computer using the USB Cable.
•   When the ID:COM port at Odin turns green, click on PDA button and select “KIES_HOME_ I9300XXELLA_ I9300OXAELLA_ 742798_ REV00_user_low_ship.tar.md5″

•  Finally, click on start button and wait for a few minutes till the installation is finished, you get a “PASS!” message, and the device reboots automatically.
• Done!